107 

sound-seal-quiets-buzz-saws
  Industrial Sound Baffles, Wall Panels, and Ceiling Absorbers are used to reduce the reverberation time, lower ambient noise levels, and improve communication in a variety of applications.
 

Sound Seal's Industrial QFA-10 Baffles consist of a vinyl coated fiberglass cloth facing on both sides of a nominally 2" thick quilted fiberglass absorber.  The baffles measure 4' wide x 2' high and have (2) grommets along (1) 4' side.  They are available in a diamond stitch or straight stitch pattern

 


Sound Seal's Industrial Polywrap Baffles are a heat sealed polyethylene bag encompassing a sound absorptive fiberglass.  The baffles measure 4' wide x 2' high and have (2) grommets along (1) 4' side.  They are available in a standard white or black facing.


Sound Seal's Industrial Sailcloth Baffles are a colorful way to introduce sound absorption into a large area. The baffles measure 4' wide x 2' high and have (2) grommets along (1) 4' side. They are available in a wide variety of colors and custom sizes.


Sound Seal's Industrial PVC baffles are an economic, efficient solution to reverberation issues.  The baffles are comprised of a poly-vinyl chloride bag encompassing a sound absorptive fiberglass and measure 4' wide x 2' high.  The typical baffle has (2) grommets along (1) 4' side and they are available with a white, black, or gray facing.  Additional sizes are available.


The Industrial FDA approved baffles are the ideal solution to reverberation issues in areas where food is present.  The baffles are comprised of a sound absorptive fiberglass core completely encapsulated in a reinforced Mylar film.  The white facing reflects light, which adds to the illumination in a room.  Standard size is 4' x 2' with 2 brass grommets on one four foot side.


Industrial Ultra Panels incorporate a fiberglass core with a variety of Industrial facings to create a clean, crisp appearance.  Ultra Panels are ideal for use in any harsh environment to reduce noise levels.  They can be manufactured in any number of sizes and thickness.


Industrial Ceiling Clouds are perfect for the reduction of sound in ceiling areas.  They are suspended horizontally with eye hooks (for panels up to 4' x 4') or T-grid attachment.  The grid may be attached in the field or at the factory before shipment for your convenience.
Ceiling Clouds are available in a 1" thickness with maximum sizes up to 4' x 10'.


Industrial Banners are ideal for areas where large amounts of absorption are required.  Industrial Banners can be manufactured in 4' wide panels up to 25' long.  Grommets are installed to create a draped effect.

       
   
   

 

     
 
©2013 Sound Seal. All Rights Reserved.