 |
|
Sound
Seal's Industrial Pipe and Duct Lag
Series is designed to offer
significant reduction of radiated
noise,
consists of a loaded vinyl
noise barrier with a scrim
reinforced aluminum foil facing on
one side.
Industrial
Pipe &
Duct Wraps are mass loaded noise
barriers with a reinforced foil
facing on one side that allows for
installation of matching lag tape.
Pipe & Duct Wrap Lag is available
with a 1" or 2" quilted fiberglass
decoupler.
 Standard rolls are
54''
wide x 30' long. Typical used to
wrap noisy pipes and ducts to block
the noise that transmits through the
walls of the pipe or duct as air or
other contents move through it as
well as to increase the sound
absorption in the cavity. It also
provides sound absorption and
thermal insulation around the pipe
or ductwork. The 2" thick quilted
fiberglass absorber improves low
frequency acoustical performance.
Use to wrap noisy pipes, ducts,
valves, and fan housing
Main features include:
-
Up to 20
decibel reduction
-
STC ratings
to 34
-
Easy to cut
and install
-
Accepts
matching Lag Tape
-
Quilted
fiberglass couplers available
|
